HELLO EVERYONE,
It`s nice to meet you I have one problem with using TEKLA. When i want to select something my area selection window is not showing ! IF any know how to fix that please write it how .
PROBLEM WITH TEKAL AREA SELECTION WINDOW
20.07.2016 09:28
Do you mean when you are dragging your mouse to select but there is no the expected green rectangular selection area appeared ? If so, maybe you could check your mouse configuration in your computer. Maybe there is a mix with the left mouse and right mouse I guess.
Yes, that it si what i mean, but i could not catch how i could fix it !!!! Thank you very much for your opinion !!!!
I try it but nothing it is happens !!!! Please help me, give some other idea !!!
If your mouse works well , and if you can make area selection in other software such as Autocad. Then it is the problem of your software.. I would suggest you download the latest version in Campus and reinstall it.
Hi!
I find some information relating to this area selection problem. Check it out, and hope it will help!
Answer- This is most likely due to an issue in your graphics card. You can verify the graphics card is the issue by going to Tools > Options >Advanced Options in Tekla. Then go to the "Model View" section and from there find the variable "XS_USE_SOFTWARE_RENDERING=" and change this to TRUE. Apply and restart Tekla, if the area selection box appears then the issue is your graphics card.
You can attempt to update to the latest graphics card driver for the card you have by going to the manufacturers website. In most cases though the issue is likely due to an internal Intel HD Graphics card, if you right click on your start menu and go to the Device Manager under Display adapters you can see if this card is included on your machine. If it is talk to your IT department and see if they can turn it off through BIOS or worst case scenario disable it through the device manager itself.
Thank you so much my friend, I will try it and I will write to you !!!!
Man it is happen now its works your incredible !!! Thank you !!!
Cool!! Happy to know it works finally!
Now I have another problem. :D I`m trying to determine the weight of reinforcing bars of panel wall but I don`t know how to make it ?
You can right click the reinforcement bars and select Inquire. Then you can find the weight information in the Inquire window.
The exercise is from practice test task of USING COMPONENTS MODULE !
It shows the selection window but i think this option will disable the video card (i have a quadro k610m, and my onboard video card is disabled). After i set the value to true, the selection window appeared but sometimes Tekla is struggling to manage the model and after that it gets locked. I have Tekla structures 2016i
i set back to false in order to use the video adapter and after that i modified the settings in my video card as in the attached picture. In the base profile of my videocard some options were set to off, after i reset them to "on" or "Application-controlled" everything works just fine. I hope this will help
Hello everyone and thank you in advance for your answers.
I have new problem with the select frame.
the saccade frame during the selection, (see attached image).
Can you help me please?
attached a further overview of the problem
Thank you for your answers
Hello, I have a same problem with selection. Have you already solved this?
Yes it is a problem of graphics driver at nvidia, return to the 391.35 driver version to fix this problem.
The user has deleted this message
Good morning to all. I have had this same issue. My pc has an NVIDIA K1200 gpu and i have tried all the options on this thread so far. Here is a list of the drivers I have tried so far:
385.90
387.95
391.35
391.58
411.95
412.16
We have even tried changing the NVIDIA settings as shown in one of the screenshots on this thread and it basically changes the selection frame from multiple frames to one single slow moving frame. We lastly replaced the video card to a brand new one, same kind and reinstalled the latest driver as per the NVIDIA web site, but the problem persists. I am currently running Tekla 17. Does anyone have any recent solutions, new information on this issue? We also tried changing the true false setting in the advanced options and it was to no avail. Please advise. Thank you
Hi,
please download the latest version of Tekla Structures Learning that includes the fix to the issue.
Hi, What does this mean? where do i download TS learning?
i have TS 17.0 and recently got a new computer with a GTX1660. i too have an issue with the graphics, i think its todo with open gl and direct x. but i dont think TS 17.0 has options to change the rendering type?
pic below of problem. thanks
Luke
Hi Amaury,
how did you go? im on version 17 too. i think its the old software with the new GPUS?
Luke
I found a solution.
Choose "Force 10 bits per component" from 3D general presettings at Nvidia control panel. And mouse trails and pink rectangles gone.
Ich hab auch ein Problem mit meiner Maus.
Erst wenn ich einen Befehl anwende kommt ein Kreuz statt den herkömlichen Pfeil. doch dieses Kreuz macht schlieren und bleibt als abdruck im Bild.
auch wenn ich meherere Objekte einfasse.
Das Problem ändert sich wenn ich die oben beschriebene Option auf True stelle. dann funktioniert es nämlich gar nicht mehr auch wenn die vorherigen Probleme dadurch behoben sind.
The user has deleted this message
Looking for Kaspersky Contact, visit on:
Kaspersky Contact
Hello Daniel,
You should try to downgrade your nvidia drivers. Here you can find all previous versions: http://www.nvidia.pl/drivers/beta
then, set XS_USE_SOFTWARE_RENDERING to default value which is FALSE.
BR,
any new
i have same problem with 1080ti
The user has deleted this message
The user has deleted this message
I found a very simple way to solve this and it works fine for me. Just go to file --> settings --> Switches and check Direct X rendering checkbox. I'm not a hardware expert but i think that GTX series video cards works better with this API because they are designed "to deal" with video games that in most cases uses this "rendering method" mainly. You must restart Tekla to changes take effect.
Thanks! It worked for me!
i have same problem with RTX 2060 how to fix it....? use rendering,, TRUE & FALSE. make the slow tekla
i agree too, very slow if i choose true option in render by software
The user has deleted this message
The user has deleted this message
cntrl+e > model view > serach render > software render = true
I have experienced with same problem, i choose the secondary gpu (intel) because the primary gpu (nvdia) have same problem like you brother... So good luck