5 posts
0
new
Go to last post
Hollow core slab
10.12.2013 09:39

I used "DWG Profile to Library" to create a section hollow core have 11 holes but can not be created. If the floor has come down from 9 holes can be created, when greater than 9 holes can not be created and error "steel4.exe has stoppped working". can you help me?

1 Upvote
Drawing from DWG file
Re: Hollow core slab 10.12.2013 12:23

Drawing from DWG file

No Upvotes
Hollow core slab
Re: Hollow core slab 18.01.2014 15:38

Because your geometry is too complex,Simplify your geometry try. hole you can create even after.
(You cannot define holes to your cross section it mean your DWG should be closed polyline)

No Upvotes
hi, is there any way to
Re: Hollow core slab 20.01.2014 08:40

hi, is there any way to modify already profile from library? Would be nice to modify existing hollow core slab profile (thickness), but it's seems not possible. In modify profiles window you can copy fixed profiles but if change values it makes no change... what's the point??

No Upvotes
Default Profiles
Re: Hollow core slab 20.01.2014 22:57

it's not possible to change, because they are standard profiles and very simple way is that to draw in AutoCAD only the contour line and import it as a profile then use generate hole (J32) to create holes or you can use sketch editor to draw contor lines.

No Upvotes